Procedure 1: ensure the piece is suited for your new place regarding size
It would be pointless to go through the strain of relocating your wardrobe if it will not fit in your new home in the first place. Ensure that you measure the passage the piece will pass through as well as the area you plan on keeping it. If it does not suit your new home, you can consider putting it on sale or donating it to a pal or loved one. You can then get a replacement once the move is complete.
If the piece suits the new place, you can proceed with the following steps.
Procedure 2: collect the necessary organizing tools
The piece will need to be safeguarded during the move and survive the process without incurring any damage. This will be achieved with the use of blankets, bubble and plastic wrap, carton elements, and tape. Special tools such as hand trucks, furniture pads, straps, and various hand-equipment will also be required.
The easiest way is to rent the services of expert relocating crews that have the required knowledge and tools to relocate the piece. They can also easily dismantle the wardrobe if it is necessary.
Procedure 3: remove everything from the wardrobe
A wardrobe should be empty before being relocated. The articles inside should be put away as soon as possible. This will give you enough time to handle the elements inside before you can start working on the wardrobe.
Procedure 4: ready your piece for transit
Give your wardrobe a good wipe and remove all detachable elements such as the drawers and shelves. Leaving them in place could cause damage. Use blankets to cushion them and tape them in place. Mark them according to where you removed them. The doors of the piece can either be dismantled and organized on their own or securely shut. If one of this is not done, they may open and damage the whole piece.
Doors that do not have latches can be closed down using tapes or straps to avoid them opening during transit. However, the tape should not be used directly on the surface of the piece to avoid ruining the finish.
All glass elements should be extracted and properly cushioned using bubble wrap and packing sheets. Blankets can also be used.
Small wardrobes can be moved wholly when wrapped in blankets and cardboard elements at the corners. This cushioning helps keep away scratches, dents, and chips. However, large pieces will have to be taken apart in most cases, and the next step caters for how to go about it.
Procedure 5: Taking the piece apart
Begin with separating the top board from the body of the piece using a screwdriver appropriate for the screws used to secure it. Cushion it in bubble wrap and use an outer layer of blankets.
Proceed to the sides of the piece and remove the screws holding the side boards in place. They should be detached from the bottom. All elements that are removed from the main body should be marked according to where they have been dismantled from. As for the screws and other small elements, place them in a ziplock bag with the piece article they are supposed to go into. Taking some snaps of the wardrobe before dismantling is advised so that you have an easier time knowing what goes where.
If the main piece can be segmented, go ahead and do so. This will make it easier to move rather than carrying the whole piece or dismantling it to tiny pieces. Additionally, the segmented pieces will be huge and bulky enough to not shift around during transit.
Procedure 6: get reputable moving help
Relocating such a bulky piece alone will be too risky a task to handle alone. Therefore, ensure you get some friends to help out or hire a relocating crew. The latter is the best possible option since relocating crews have the expertise and experience required to move such large pieces. Hence, you should do your homework on the best moving crew you can find, ask for an estimate, and cautiously go through the offer presented before making anything official.